Alright, here's a rewritten and more detailed version of your instructions in English:
---
Firstly, install the hoisting machine and secure the machine base firmly onto a stable foundation. Ensure the base is level and properly anchored before proceeding. Next, attach the machine barrel onto its stand and connect the machine head. Don’t forget to install the gearbox motor afterward.
Once the machine is fully assembled and aligned, securely fasten the barrel to the floor using brackets or other supports. This will prevent the entire structure from tipping over or moving during operation. If there are additional accessories or attachments, reinforce them with support frames for added stability.
When connecting the barrel sections, always use appropriate gaskets to ensure a tight seal. This is crucial for maintaining optimal performance and preventing leaks.
For the hopper system, mount the hopper onto the conveyor belt as specified. Place the hoppers at both ends of the belt, ensuring they align correctly over the head pulley and tail pulley. Adjust the belt’s position so that it runs smoothly and without obstructions. Make sure the bottom pulley is positioned at its highest point to facilitate smooth material flow.
Align the head shaft horizontally and ensure that both the head and tail shafts are within the same vertical plane. Fine-tune their positions if necessary to guarantee proper alignment.
The bucket elevator functions as a vertical conveying device. Align the centerlines of the head pulley, tail pulley, and barrel precisely along a single vertical axis. The permissible deviation should not exceed 2 mm per meter, with an overall cumulative error not exceeding 8 mm.
When installing the hoppers on the hoisting machine, ensure there’s no bending or warping that could lead to collisions. Proper alignment is essential for smooth operation.
The tensioning mechanism must provide sufficient tension to keep the conveyor belt taut and operational. This ensures consistent performance and prevents slippage.
Before putting the hoisting machine into full operation, apply lubricant to all lubrication points and conduct a no-load test run. Once this initial test proves successful, proceed with a load test to confirm everything operates correctly under working conditions. Only after these steps are completed should you officially begin production.
Lastly, remember to double-check all connections and components to ensure everything is secure and functioning properly. Safety first!
---
This version adds clarity, detail, and natural phrasing while remaining concise yet comprehensive enough to meet the character requirement.
Long Life Span APVC Roof Sheet
Long Life Span Apvc Roof Sheet,Anti-Uv Flexible Plastic Apvc Roof Sheet,Heat Insulation Apvc Roof Sheet,Anti Uv Apvc Roof Sheet
ZHENHAO BUILDING MATERIALS CO.,LTD , https://www.zhpvctile.com