In daily life, we often clean and maintain office furniture to keep them shiny. But you may not know that some wrong cleaning and maintenance methods, although temporarily making our furniture clean, actually cause potential damage to the furniture. As the use time increases, your furniture will be irreparable. The problem.
First, office furniture cleaning practical tactics
â— The rag is clean
When cleaning and maintaining furniture, be sure to make sure the rags are clean. After cleaning or wiping off the dust, be sure to turn over or replace it with a clean cloth. Don't be lazy and repeatedly use the dirty side, this will only make the dirt rub repeatedly on the furniture surface, but will damage the bright surface of the furniture.
â— Select the right care agent
In order to maintain the original brightness of the furniture, there are currently two kinds of furniture care products: furniture care spray wax and cleaning and maintenance agent. The former is mainly for furniture made of wood, polyester, paint, fireproof rubber sheet, etc., and has two different fresh fragrances of jasmine and lemon. The latter is suitable for all kinds of furniture such as wood, glass, synthetic wood or melamine board, especially suitable for mixed materials. Therefore, if you can use a skin care product that combines cleansing and care, you can save a lot of valuable time.
Before using the wax and cleaning and maintenance agent, it is best to shake it first, then hold the spray can directly at a 45 degree angle, so that the liquid component in the tank can be completely released without losing pressure. Then gently spray the dry rag at a distance of about 15 cm, so that you can wipe the furniture again, which can be very good for cleaning and maintenance.
In addition, after using the rag, remember to wash and dry. For furniture with fabric materials, such as fabric sofas and leisure cushions, you can use the cleaning and cleaning agent for cleaning carpets. When using, first use a vacuum cleaner to remove dust, then spray a small amount of carpet cleaner on a damp cloth.
Second, the practical tactics of office furniture maintenance
â— wooden furniture maintenance
The greatest advantage of natural wood furniture products is the natural wood grain and the changing natural color. Since natural wood is a constantly breathing organism, it must be placed in a temperature and humidity environment, while avoiding the presence of beverages, chemicals or overheated objects on the surface to avoid damaging the natural color of the wooden surface. If it is a beautiful plate material, when there is more dirt, you can use a diluted neutral detergent to wipe it once with warm water, then wipe it with water. Remember to wipe off the residual water stain with a soft dry cloth. After that, use the maintenance wax to polish it, even if you're done. Only by paying attention to daily cleaning and maintenance can we make wood furniture last forever.
â— Leather furniture maintenance
The leather has good heat resistance, moisture resistance and ventilation characteristics, and the natural weaving of the leather is less directional. It is evenly stretchable even if it is laid flat or hanging. In addition, the dyeing of the leather is not easy to fade and has an elegant color. It has a great touch and a beautiful appearance, so it has always been loved by the consumers. How can we maintain the attractive appearance of leather products? Weekday cleaning is the key. General maintenance only need to use a clean soft cloth to gently wipe, if you want to clean the dirt caused by long-term use, the most ideal way is: First, please use warm water diluted neutral detergent (1% -3%) to wipe first Then wipe the cleaning solution with the wrung clean water, and then wipe it with a dry cloth. After it is completely dry, wipe it with a proper amount of leather care agent.
â— Fabric furniture maintenance
The fabrics most commonly used in chairs and sofas, the comfortable touch and rich colors make the expression of traditional furniture more diverse. Commonly used maintenance methods: When it is stained with dry dirt such as dust and sand, just pat it off or use a vacuum cleaner to suck it. As for the granulated sand, use a brush to gently brush inward, but Do not use a hard brush to avoid damage to the fabric. If you get a drink or juice, you can use a paper towel to remove moisture, then wipe it with warm water to dissolve the neutral detergent, then dry it with a clean soft cloth, and then dry it at low temperature.
â—Steel furniture maintenance
Solid and durable steel furniture is the most common in the office, especially the ideal cabinet and other products, but also an indispensable storage tool in the office. Steel office furniture is presented in the exterior part. The maintenance method can be wiped with a soft cloth, but avoid using rough, organic solvents (such as turpentine oil, decontamination oil) or wet cloth to wipe, which are caused by scratches and rust. The main reason.
Dicyandiamide Raw Material,High Purity Dicyandiamide,Dicyandiamide 99.5% Raw Materials,Dicyandiamide Industry Chemical Materials
Beilite Chemical Co., Ltd. , http://www.dicyandiamideblt.com