Bathroom decoration should be cautious when purchasing sanitary ware

The decoration of the living room is very important for the selection of sanitary products. The bathroom involves complex water circuit transformation. Although the area is not large, it cannot be neglected in the decoration. The choice of sanitary wares from the beginning of the measurement of the azimuth size to the final step of the purchase, which has to go through nine major steps, can not be underestimated.

The first step: quantity. Measuring bathroom

The size and decorative style of each area.

The second step: think. When purchasing, you should first think of the supporting products. The components and accessories of the whole set should be at the same level. The matching style and color of the matching products must match the decorative style of the bathroom, so that it can be harmonious and beautiful.

The third step: election. Choose the appropriate size of the bathroom, determine the drainage method, installation size and other bathroom products and bathroom size and style.

The fourth step: look. You can choose to observe the reflective surface of the bathroom product from the side under strong light. The surface has no or few blisters and pitting. The product with high brightness index uses high quality glazed material and very good glazing process. The reflection of light is good, so the visual effect is good.

The fifth step: touch. It can be rubbed gently on the surface by hand, and it feels very smooth and fine. It can also touch the back and feel the slight friction of “sand”.

Step 6: Listen. The ceramic surface can be tapped by hand. The sound of a generally good ceramic material being knocked out is relatively crisp. When there is hoarse sound, there may be cracks.

Step 7: Ratio. The main reason is to investigate the water absorption rate, and the lower the water absorption rate, the better. Ceramic products have a certain ability to adsorb and penetrate water. If water is sucked into the ceramic, it will have a certain expansion, which will easily cause the glazed surface of the ceramic surface to crack due to expansion; especially for toilets, if the water absorption rate is high, it is easy. Inhalation of dirt and odor from the water into the ceramic will result in an unremovable odor over time.

Step 8: Recognition. Recognize the brand, recognize the service, and recognize the water. At present, Sanitary Ware has passed the water-saving certification, and there are also national famous brand products, consumers can rest assured to buy. At the same time, the installation of the toilet also has certain requirements, which should be installed by professional installers.

Step 9: Buy. After the above layers of tests, the last shop than the three, rest assured to buy their own satisfactory bathroom products.

Boron Nitride

Boron Nitride,Cubic Boron Nitride Powder,Boron Nitride Ring

Raw Materials,PVC Additives Co., Ltd. ,