Furniture purchase is an important part of home improvement. Good furniture is placed in the bedroom, which is pleasant and relaxing, so it is very important to choose a set of furniture that suits you. Choosing furniture not only depends on the appearance but also on its environmental quality. I have to say that the selection of furniture is an intellectual job!
Â
Â
Upholstered furniture
Â
At present, cloth furniture is mainly dominated by cloth sofas and cloth beds. Most cloth furniture still presents a warm and comfortable style, corresponding to the touch of cloth itself.
Â
First of all, the structure should be ultra-stable structure, dry hardwood, there should be no protrusions, but there should be piping at the edges to shape the outstanding furniture.
Â
Secondly, the first joint should have reinforcement equipment, which is connected to the structure through glue and screws. Whether it is plug-in, bonding, bolt joint or pin joint, we must ensure that each joint is strong to ensure the life. There should be steel bars to reinforce the tension spring at the load-bearing tension spring, and the fabric fixing the tension spring should not be easily corroded and tasteless, and the fabric covering the tension spring has the same characteristics as above. The fire-retardant polyester fiber layer should be placed under the seat, the center of the cushion should be high-quality polyurethane, and the back of the furniture should be covered with polypropylene fabric to cover the spring. For safety and comfort, the same backrest should have the same seat requirements.
Â
Solid wood furniture
Â
At present, wooden furniture is solid wood furniture and panel furniture go hand in hand, which has already broken the unified situation of solid wood furniture.
Â
Wood is afraid of moisture and insects, so living in high humidity areas, you should pay special attention to choose wood with high fat content and better moisture resistance, such as teak, linden wood, South American pear, etc., or furniture that has been treated with moisture, Wooden furniture such as paint and moisture protection.
Â
Lightly press the various stress points of the furniture, such as column feet, drawers, door leaves, shelf supports, etc., whether the test is stable; pay attention to the interface of heavy furniture components should be fastened with screws or glued; check the drawer sliding and Orient and open all the doors and drawers to ensure that they are properly installed and not in use; touch the exterior of the furniture with your hands to see if they are smooth; carefully check the exterior of the furniture for stain marks and polished paint at the corners Is it not painted evenly, does it show any cracks, etc. (Editor: Peter)
Â
Prefab House is made of light Steel Structure and sandwich panel for the walls and roof. The structure is connected by bolts and the walls are fixed with rivets.
The wall/roof panel can be insulated by polystyrene(EPS), polyurethane(PU), rock wool and fiber glass.
The house is widely used as temporary office, temporary hospital, family house, dormitory, canteen and so on.
Prefab House
Prefab House,Small Prebuilt Homes,Affordable Prefab Homes,Affordable Prefab House
Foshan TianPuAn Building Materials Technology Co.,Ltd. , https://www.tpa-prefabhouse.com