The decoration of the house is generally installed on the floor, not the tile or the wooden floor. If a family installs the wooden floor, it will be clean, so the floor of our house is definitely to be laid, then the type of wood floor is Which ones? Where do you want to pay attention to the decoration of the wooden floor ? If you want to install the wooden floor, let's take a look at the small series of the decoration home network.
First, the type of wood flooring
1. Laminate flooring - high wear resistance. It is also a three-layer pressing, the surface layer is a melamine resin impregnated decorative paper containing a wear-resistant material, the middle layer is a medium- and high-density fiberboard or a particle board, and the bottom layer is a balance paper impregnated with a phenolic resin. The three layers are formed by hot pressing of a synthetic resin glue, and the wear resistance and dimensional stability of such a floor are good. The laminate flooring is made of high-density board, the material is taken from the fast-growing forest, and the 2-3 year old wood is broken into wood chips for use. In this sense, the laminate flooring is an environmentally friendly wooden floor. At the same time, because the laminate flooring has a wear-resistant layer, it can adapt to harsh environments, such as living rooms, aisles and other places where people often walk.
2. Parquet flooring - not easily deformed. The solid wood composite floor can be divided into multi-layer solid wood and three-layer solid wood composite floor, which is characterized by good dimensional stability. The multi-layer solid wood composite floor is made of multi-layer solid wood plywood, and then covered with a certain thickness of precious wood foil inlaid jigsaw or sliced ​​veneer as a panel, and then passed through a synthetic resin glue - urea-formaldehyde resin glue or phenolic resin The glue is hot pressed and processed into a floor.
3. Solid wood flooring - the pursuit of comfort, traditional solid wood flooring is still infinite, from natural wood, the price varies according to the tree species. The solid wood floor is processed by equipment without any bonding treatment. Commonly, there are flat mouth, tongue and socket, finger joint, and integrated grounding plate.
Second, the decoration of the wooden floor notes
1. The keel needs to be dry: the moisture content of the wooden floor is generally 12%, and the moisture content of the un-dried wooden keel is usually about 25%. If the keel is not pre-dried, the humidity difference will cause the wooden floor to quickly absorb moisture, resulting in the floor. Arched, lacquered surface burst.
2. Floor gap: The wooden floor must be laid with a suitable gap. It is best to arrange the assembly gap of the wooden floor according to the temperature and humidity of the environment. If it is too loose, the floor will have a large gap when it is cold or dry and shrink. If it is too tight, the floor will be arched when it is overheated and damp.
3. Floor height: Before installing the wooden floor, pay attention to whether the indoor height of the home is allowed. The installation of the wooden floor will account for a part of the indoor height. If the height of the room is not enough, it is recommended not to choose the wooden floor.
4. Fixing method: It is not advisable to use wooden wedges and nails to fix the wooden floor. It will cause the nailing force to be insufficient due to the small contact surface between the wooden wedge and the nail. It is easy to cause the wooden keel to loosen. When stepping on the floor, There will be a noise.
Now the floor of the building must be paved. But the types of paving are different, so what are the types of decorative wooden flooring and what are the precautions? I think that through the introduction of the above small series, everyone knows about these, then if you still want to know more about decoration, Please continue to pay attention to the decoration home Internet cafe.
Automatic high-speed Plane Mask Machine(1 ear-loop machine)
Machine Intraduction:
This device is a fully automatic Mask Machine( outside ear-loop). It can be used for the production of flat medical masks, flat protective masks and masks with the maximum of 3 layers. We adopt ultrasonic welding technology, and the finished product is beautiful. The whole production line from feeding, nose line insertion, edge sealing, cutting to finished products are fully automated. This machine are operated easily, and it can save a lot of labor cost. This machine has mature and stable technology with low failure rate. This equipment adopts photoelectric detection so it can sensing the raw materials to avoid mistakes and reduce waste.
Non Woven Machine,Non Woven Making Machine,Non Woven Mask Making Machine,Non Woven Fabric Making Machine
Dongguan Huitong Automatic Machinery Technology Co., Ltd , https://www.medicalmaskmachines.com