Years are flowing, time flies. Looking back at the macroeconomic environment of 2011, it can be described as "intricate." From the outside, the continued deepening of the European debt crisis, the return of developed countries in the real economy, and the quiet rise of trade protection; from the inside, the export situation is increasingly severe, and the suspension or construction of key national investment projects such as energy and high-speed rail Etc. All of this adds more variables to the prospects for China's economic development in 2012. Then, in such an external environment, what kind of performance will China's machine tool industry have? In this regard, Wu Bolin, executive vice president of the China Machine Tool Industry Association, recently accepted an interview with the reporter of the Information Technology Department of the Machine Tool Association.
The machine tool market is rising first and then the main economic indicators in 2011 still maintain rapid growth.
Wu Bolin told reporters that the economic performance of the industry in the first half of 2011 continued the development trend during the 11th Five-Year Plan period. However, it is worth noting that since May 2011, the number of new orders in the whole industry has been significantly lower than the downward trend. In August, some new key enterprises were down 51.1% from the same period of 2010; they were down 34.8% from July. Mainly low-end products have the largest decline. Looking at the market conditions of the machine tool industry in the whole year, the overall performance of the first half of the year is first and foremost. However, due to good market performance in the first half of the year, the main economic indicators for the whole year of 2011 will continue to grow faster than the previous year.
The analysis of the economic operation of the industry released by the Machine Tool Association shows that from January to December 2011, the total industrial output value of the whole industry was 660.65 billion yuan, a year-on-year increase of 32.1%; the cumulative sales value of finished products was 642.49 billion yuan, a year-on-year increase of 31.1%. The sales rate of industrial products reached 97.3%, which was 0.8 percentage points lower than the same period in 2010.
The progress is obvious. At this stage, the basic characteristics of the industry are big but not strong.
Speaking of the achievements of the industry in 2011, Wu Berlin admits that after the rapid development of the “Eleventh Five-Year Planâ€, although our CNC machine tool industry has begun to take shape, it has achieved remarkable results in independent innovation, and the international status of the industry has been achieved. Significant improvement, but we should also see problems that restrict the development of the industry. To sum up, there are two main aspects: First, the technological progress is relatively lagging behind; second, the development mode is biased towards scale expansion.
Wu Bolin told reporters that the basic characteristics of the machine tool industry at this stage are large but not strong. The main contradiction is the contradiction between the accelerated upgrading of the domestic market demand structure and the incompatibility of the industry supply capacity. At present, the awareness of science and technology innovation and energy conservation and environmental protection in the whole society has been unprecedentedly improved. Under the effect of the decline in growth rate and the dual factors of restructuring and transfer of the whole society, the market demand structure is accelerating and upgrading, which will inevitably bring about the demand for upgrading of manufacturing equipment. This can be well confirmed from the 2011 import statistics.
Industry statistics from the Machine Tool Association from January to December show that China's imports of machine tool products are growing rapidly, with imports of 20.3 billion US dollars, up 29% year-on-year. Wu Bolin pointed out that the current situation of China's economic growth relying on exports and investment has not fundamentally changed, but the growth momentum of these two aspects has dropped significantly. It can be expected that macroeconomic growth will slow down in the coming period, and demand for machine tool products will also slow down. In this case, the task of pushing the industry from big to strong has become an urgent task.
Establish three major goals, promote the transformation of industry development strategy and shift the focus of work
"Integrated analysis of the current characteristics of the industry, major contradictions and significant changes in the recent domestic market, we can easily judge that the machine tool industry is in a critical turning point to achieve major strategic changes." Wu Bolin gave his own current situation Judgment: First of all, from the perspective of national development strategy, high-end machine tool products are heavily dependent on imports and are a threat to national defense and economic security. Second, strategic transformation has become an inevitable choice for the survival and development of the industry. In addition, the development of industrial enterprises in recent years has laid a solid industry foundation for the implementation of the strategic transformation from large to strong in the whole industry.
"It can be said that from big to strong has become the common aspiration and inevitable choice of the industry." Wu Bolin said that after the release of the industry's "Twelfth Five-Year Plan", according to the requirements of the Ministry of Industry and Information Technology and industry enterprises, to further highlight the key points and operate Sexuality, better combined with major special work, after repeated research, investigation, discussion and improvement, the Machine Tool Association finally formed the "Working Point of the "Twelfth Five-Year Plan" during the "Machine Tool Industry" (Trial)" (hereinafter referred to as: work points) ).
“The main points of the work clearly put forward the three major landmarks of the industry during the 12th Five-Year Plan period; the three key tasks of the industry during the 12th Five-Year Plan period (also refers to the construction of the three major industries) and the adoption The main measures include: First, breakthroughs in providing equipment and services for key manufacturing industries in key industries; Second, the domestic market share of medium and high-end CNC machine tools has been significantly improved, and high-end CNC systems and functional components The domestic market share has increased significantly; the third is the formation of several world-renowned brands and advantageous enterprises."
"At present, the work points have formed a broad consensus in the industry, which also established the direction and action plan for the industry during the 'Twelfth Five-Year Plan' period. To this end, the whole industry must strive to achieve resources, energy, goals and other three aspects. Concentration, step by step to achieve the strategic goal of 'from big to strong'."
Give play to the role of the association's bridges and ties, and promote the industry from big to strong In the industry's "Twelfth Five-Year Plan", in 2012, it plays an important role. When the reporter asked about the work objectives of the Machine Tool Association in 2012, Wu Bolin said: "As an industry organization, the association's fundamental purpose is to serve and promote the development of the industry. During the '12th Five-Year Plan' period, the association will strive to achieve the shift of its work focus. With three key tasks as the focus, fully mobilize various resources inside and outside the industry, and play its due role in the process of achieving the three landmark goals in the industry."
To this end, Wu Bolin summed up four specific goals, namely: 1 Actively organize supply and demand exchange activities and promote three major capacity building. 2 Organize industry experts to study and solve hot issues in the process from large to strong. 3 Adjust the focus of work, and strive to serve the industry from big to strong. 4 Give full play to the guiding role of major special projects and enhance the industry's ability to innovate.
The exhibition has always been one of the important tasks of the association's service industry. Referring to the exhibition of the 7th China CNC Machine Tool Exhibition (CCMT2012), Wu Bolin told reporters that the current exhibition work has already ended, and domestic and foreign exhibitors have made significant breakthroughs in their registration. The exhibition demand area gap is more than 35%. It is expected that there will be 700. Domestic exhibitors and more than 140 overseas exhibitors appeared at CCMT2012. This also reflects from one aspect the expectation that the global machine tool market will perform well in the context of the global economy.
Finally, when it comes to the future development of the machine tool industry, Wu Bolin said with deep feeling: "After years of development, we have achieved world-renowned achievements, but there is still a long way to go before the realization of the goal of machine tool power. Today, we are standing at a new historical starting point, establishing a common goal of becoming bigger and stronger, and taking on the historical mission of revitalizing the national machine tool industry, which will inspire us to move forward."
The machine tool market is rising first and then the main economic indicators in 2011 still maintain rapid growth.
Wu Bolin told reporters that the economic performance of the industry in the first half of 2011 continued the development trend during the 11th Five-Year Plan period. However, it is worth noting that since May 2011, the number of new orders in the whole industry has been significantly lower than the downward trend. In August, some new key enterprises were down 51.1% from the same period of 2010; they were down 34.8% from July. Mainly low-end products have the largest decline. Looking at the market conditions of the machine tool industry in the whole year, the overall performance of the first half of the year is first and foremost. However, due to good market performance in the first half of the year, the main economic indicators for the whole year of 2011 will continue to grow faster than the previous year.
The analysis of the economic operation of the industry released by the Machine Tool Association shows that from January to December 2011, the total industrial output value of the whole industry was 660.65 billion yuan, a year-on-year increase of 32.1%; the cumulative sales value of finished products was 642.49 billion yuan, a year-on-year increase of 31.1%. The sales rate of industrial products reached 97.3%, which was 0.8 percentage points lower than the same period in 2010.
The progress is obvious. At this stage, the basic characteristics of the industry are big but not strong.
Speaking of the achievements of the industry in 2011, Wu Berlin admits that after the rapid development of the “Eleventh Five-Year Planâ€, although our CNC machine tool industry has begun to take shape, it has achieved remarkable results in independent innovation, and the international status of the industry has been achieved. Significant improvement, but we should also see problems that restrict the development of the industry. To sum up, there are two main aspects: First, the technological progress is relatively lagging behind; second, the development mode is biased towards scale expansion.
Wu Bolin told reporters that the basic characteristics of the machine tool industry at this stage are large but not strong. The main contradiction is the contradiction between the accelerated upgrading of the domestic market demand structure and the incompatibility of the industry supply capacity. At present, the awareness of science and technology innovation and energy conservation and environmental protection in the whole society has been unprecedentedly improved. Under the effect of the decline in growth rate and the dual factors of restructuring and transfer of the whole society, the market demand structure is accelerating and upgrading, which will inevitably bring about the demand for upgrading of manufacturing equipment. This can be well confirmed from the 2011 import statistics.
Industry statistics from the Machine Tool Association from January to December show that China's imports of machine tool products are growing rapidly, with imports of 20.3 billion US dollars, up 29% year-on-year. Wu Bolin pointed out that the current situation of China's economic growth relying on exports and investment has not fundamentally changed, but the growth momentum of these two aspects has dropped significantly. It can be expected that macroeconomic growth will slow down in the coming period, and demand for machine tool products will also slow down. In this case, the task of pushing the industry from big to strong has become an urgent task.
Establish three major goals, promote the transformation of industry development strategy and shift the focus of work
"Integrated analysis of the current characteristics of the industry, major contradictions and significant changes in the recent domestic market, we can easily judge that the machine tool industry is in a critical turning point to achieve major strategic changes." Wu Bolin gave his own current situation Judgment: First of all, from the perspective of national development strategy, high-end machine tool products are heavily dependent on imports and are a threat to national defense and economic security. Second, strategic transformation has become an inevitable choice for the survival and development of the industry. In addition, the development of industrial enterprises in recent years has laid a solid industry foundation for the implementation of the strategic transformation from large to strong in the whole industry.
"It can be said that from big to strong has become the common aspiration and inevitable choice of the industry." Wu Bolin said that after the release of the industry's "Twelfth Five-Year Plan", according to the requirements of the Ministry of Industry and Information Technology and industry enterprises, to further highlight the key points and operate Sexuality, better combined with major special work, after repeated research, investigation, discussion and improvement, the Machine Tool Association finally formed the "Working Point of the "Twelfth Five-Year Plan" during the "Machine Tool Industry" (Trial)" (hereinafter referred to as: work points) ).
“The main points of the work clearly put forward the three major landmarks of the industry during the 12th Five-Year Plan period; the three key tasks of the industry during the 12th Five-Year Plan period (also refers to the construction of the three major industries) and the adoption The main measures include: First, breakthroughs in providing equipment and services for key manufacturing industries in key industries; Second, the domestic market share of medium and high-end CNC machine tools has been significantly improved, and high-end CNC systems and functional components The domestic market share has increased significantly; the third is the formation of several world-renowned brands and advantageous enterprises."
"At present, the work points have formed a broad consensus in the industry, which also established the direction and action plan for the industry during the 'Twelfth Five-Year Plan' period. To this end, the whole industry must strive to achieve resources, energy, goals and other three aspects. Concentration, step by step to achieve the strategic goal of 'from big to strong'."
Give play to the role of the association's bridges and ties, and promote the industry from big to strong In the industry's "Twelfth Five-Year Plan", in 2012, it plays an important role. When the reporter asked about the work objectives of the Machine Tool Association in 2012, Wu Bolin said: "As an industry organization, the association's fundamental purpose is to serve and promote the development of the industry. During the '12th Five-Year Plan' period, the association will strive to achieve the shift of its work focus. With three key tasks as the focus, fully mobilize various resources inside and outside the industry, and play its due role in the process of achieving the three landmark goals in the industry."
To this end, Wu Bolin summed up four specific goals, namely: 1 Actively organize supply and demand exchange activities and promote three major capacity building. 2 Organize industry experts to study and solve hot issues in the process from large to strong. 3 Adjust the focus of work, and strive to serve the industry from big to strong. 4 Give full play to the guiding role of major special projects and enhance the industry's ability to innovate.
The exhibition has always been one of the important tasks of the association's service industry. Referring to the exhibition of the 7th China CNC Machine Tool Exhibition (CCMT2012), Wu Bolin told reporters that the current exhibition work has already ended, and domestic and foreign exhibitors have made significant breakthroughs in their registration. The exhibition demand area gap is more than 35%. It is expected that there will be 700. Domestic exhibitors and more than 140 overseas exhibitors appeared at CCMT2012. This also reflects from one aspect the expectation that the global machine tool market will perform well in the context of the global economy.
Finally, when it comes to the future development of the machine tool industry, Wu Bolin said with deep feeling: "After years of development, we have achieved world-renowned achievements, but there is still a long way to go before the realization of the goal of machine tool power. Today, we are standing at a new historical starting point, establishing a common goal of becoming bigger and stronger, and taking on the historical mission of revitalizing the national machine tool industry, which will inspire us to move forward."
Led Emergency Inverter ,Rechargeable Inverter Led Bulb,Emergency Lighting Inverter,Smart Inverter Bulb
NINGBO WIKI IMPORT EXPORT CO., LTD. , https://www.emergencylightings.com