Everyone who has had experience in home improvement should know that the wood floor in the home needs regular repair and maintenance. Waxing on the floor is the most common and indispensable method, which can extend the service life of wood floors. . Then, what are the steps and precautions for floor waxing? 
Floor waxing step analysis
1, waxing environment preparation
Waxing the floor , it is best to choose when the weather is better, and fall is the most appropriate, autumn season, is very favorable for floor waxing. Be sure to avoid construction in high humidity or low temperature weather, because the humidity is too high and white turbidity will occur, and too low a temperature will make the floor wax harden. This is not conducive to construction.
2, construction tools and floor wax preparation
If it is a large-area waxing, you can use a waxing machine. If you use a small area, you can use a dust or a soft cloth. In addition, the corresponding floor wax must be prepared. 
3, clean the ground
Before starting waxing, be sure to organize the furniture that needs to be waxed, and determine the waxing area; there is also to clean the floor area, to ensure that there is no dust or other dirt before waxing, to prevent waxing Finish. Wipe the floor with a wrung mop or a soft cloth when cleaning. It should be noted that after the cleaning, the floor must be completely dry before it can begin waxing.
4, waxing
Stir the floor wax thoroughly and use a clean rag or sponge to fully dip the floor wax. Do not dribble as a standard. Carefully apply according to the direction of the wood grain of the wooden floor. The speed should not be too fast, do not leak or uneven thickness, and keep it thin. Uniform.
5, polishing
General floor waxing will be played twice, after the first pass, then wax again. Each time the wax is applied, it must wait for a layer of wax to dry before it can be applied with a layer of wax. After completely drying, polish the surface with a fine sandpaper or a soft cloth. 
Floor waxing matters needing attention
1. Floors should be floor waxed at least twice, each time using a cloth or waxer that does not have fluff to rub the floor to let the wax penetrate into the wood.
2, if you want to make your home's floor light enough, then every time you hit the floor wax, must be lightly polished with a soft cloth.
3, can also use polyester amine floor wax, brush with a clean brush three times, pay special attention to the floor seams.
4, after each floor wax, must wait for the spicy completely dry, use a very fine sandpaper to polish the appearance, clean, and then play the second, three times the wax. 
Editor's summary: The above is Xiaobian's introduction to the floor waxing step analysis and floor waxing notes. After reading this article, is it right? For floor waxing related knowledge, with a more comprehensive understanding, with The right way to do maintenance for your home floor.
Manganese Sulfate food and pharmaceutical grade, used as a Manganese fortifier in food or nutrition supplement
Manganese Sulfate
Manganese Sulfate Monohydrate, Manganese Sulfate Food Grade, Manganese Sulfate Pharmaceutical Grade, MnSO4.H2O
Jiangsu Kolod Food Ingredients Co., Ltd. , https://www.kolodchem.com