1. Operating platform height
When working in the kitchen, the height of the console plays a decisive role in preventing fatigue and turning around. When you bend your body forward 20 degrees Celsius for a long time, it will have a great load on your waist, and long-term back pain will also come with it. Therefore, the height of the platform must be determined according to height when decorating. When decorating, the men pay attention to the details and the wife's hard work will be less.
2. Lighting arrangement
Kitchen lighting needs to be divided into two levels: one is the lighting of the entire kitchen, and the other is the lighting of washing and cooking. The latter generally arranges partial lights in the lower part of the cabinet, sets up convenient switch gears, and the current well-functioning range hoods are generally lighted and adequate for cooking.
3. Electrical equipment embedded in the kitchen cabinet
Now that the size of the kitchen is relatively modest, electrical appliances are also brought into the kitchen. Different refrigerators, ovens, microwave ovens, and dishwashers can be placed in the proper positions in the kitchen cabinet for each person's different needs, which is convenient for opening and use.
4. The low cabinet in the kitchen is best made into a drawer
Push-pull style is easy to pick and place, and the vision is also better. The wall cabinets are generally made of 30 to 40 cm wide multilayer grids, with the doors open to the outside or folded sliding doors.
5. Make full use of available space
The gap between the wall cabinet and the operation platform can generally be used, and it is easy to pick up some utensils needed for cooking in the middle, and some of them can also be used as simple rolling shutters to prevent dust from falling from small appliances. Such as food processing machines, toasters and so on.
6. Children's safety protection
Many places in the kitchen must be considered to prevent children from being at risk. If the necessary extensions are set on the hearth to prevent pots and bowls from falling, all kinds of washing products should be placed in special cabinets, and knives and other appliances should be placed in drawers with safe opening.
7. Can sit and work
A lot of work in the kitchen is completely dry, so that you can relax your spine, so set up a small platform for you to sit and work.
8. Garbage placement
There is a large amount of garbage in the kitchen, and the smell is also large. It is easy to place it in a place where it is convenient for dumping. In a hidden place, such as a low cabinet door under a sink, there is a trash can or a push-pull garbage drawer. The above points do not know if it will help your kitchen decoration.
There are also several places to note:
1. Don't clash with kitchen door opening and refrigerator door opening;
2. The drawer should never be set in the corner of the cabinet;
3 before the renovation of the kitchen needs to take into account the kitchen heating in order to prevent the cabinet door, drawer collision;
4. Do not bump the opening of the kitchen window and the sink. When measuring the kitchen, it is best to avoid it passively twice.
Decoration company entrance decoration decoration electrical lighting range hood microwave oven decoration kitchen kitchen door roller shutter window drawer cabinet cabinet door kitchen cabinet door door door
Metallographic Cutting Machines
Cutting is the first step of material analysis. The selection of cutting machine and cutting wheel must comply with the geometric size and material characteristics of the sample. The perfect metallographic cutting should avoid microstructure thermal damage and deformation, and preserve the necessary accuracy and efficiency.Hardness and ductility are the two main parameters for selecting the cutting wheel. The best choice of the cutting wheel depends on the size, hardness and ductility of the material and the equipment used. Trojan's cutting products speak with facts and the cutting process is simple, fast and accurate.
Metallographic Cutting Machines,Metallographic Cutting Equipment,Metallographic Cut-Off Saw Equipment,Metallurgical Sample Cutting Machine
TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterials.com