Solid wood flooring is made from natural raw materials - wood. From the bottom is the floor made from the same tree species. Because of its selection of natural materials, it is natural, always maintains its natural qualities, does not produce pollution, and is not easy to vacuum. It caters to the pursuit of health in the 21st century and advocating natural style. It is a truly green building material product.
First, the market is generally sold solid wood paint-free floor.
According to the paint:
The swatches: The floor blanks themselves are flawed. By covering with a layer of opaque putty, the floor looks very uniform. The disadvantage is that after installation, under the irradiation of sunlight, it will fade, forming a significant color difference with places that cannot be seen. ! This is the practice of low-cost floors on the general market.
Varnish board: The flooring of this practice is very demanding on the billet, so the price is much higher. Ordinary consumers will mistakenly think that swatches look better than lacquer boards, so they will be deceived and spend more! The difference between the swatches, as long as the comparison of the front and back, the general front will be darker than the back.
In addition, the paint is divided into light, semi-matte and matt.
By width and narrowness:
Wide board: Generally refers to a board with a width of 115 mm or more and a length of 900-910 mm, commonly known as a board, and the price is about 10% more expensive than a narrow board. The width is not as wide as possible, the size is large, the floor seam is less, so the floor is easy to arch!
Narrow plate: refers to a plate with a width of 95mm or less and a length of 610-910mm, commonly known as a small plate. Especially high-end flooring, sometimes the price of small plates is much lower than the big plate! Some may be about 30% lower.
Second, the purchase and installation of wood flooring need to consider the factors
1. When purchasing solid wood flooring online, the buyer should contact the seller directly to ask the color of the floor; specifications; level. price and freight. Ask the seller if there is a model, there is a model, it is best to ask the seller to send the first model, confirmed after the purchase.
2 It is best to use Want Want to contact and pay via Alipay. Be sure to confirm the receipt of the goods. Check whether the quantity, quality, specification, design, material, etc. of the floor are consistent with the requirements of the purchase (or model) before confirming Alipay payment to avoid being deceived.
3. The paving of solid wood floors is a very important part. "Three-point quality seven-pavement" has been recognized and cautioned by experts. There are many ways to install solid wood flooring, but it has significant professional characteristics. Therefore, the paving of solid wood floors must emphasize professionalism. Only by understanding and understanding the basic properties of wood and the moisture content of wood floors and the environmental conditions for paving can be scientifically paved. Here, we can only introduce the basic requirements for paving:
First of all, before the solid wood floor pavement requires confirmation of environmental conditions. Cross construction is generally prohibited; the ground floor should be flat and dry (dryness should be based on the local equilibrium humidity as a consideration).
Second, we must choose the appropriate auxiliary material. Such as keel wooden file, auxiliary floor and moisture-proof products (moisture-proof layer, moisture-proof agent), keel must be dried or treated by anti-corrosion and anti-mite! It is not recommended to use undried wood as the keel directly to avoid affecting the floor.
Thirdly, the moisture content of the pre-installation floor should be tested to confirm whether its indicators meet or meet the national standards. Moisture content is the most important quality index of solid wood flooring. Confirmation before installation is conducive to proper understanding of installation clearance or tightness.
Fourth, we must pay enough attention to the treatment of the moisture barrier. As we all know, the floor paving environment is often the decoration of construction conditions, the humidity is much higher than normal conditions, mix cement paste, brush the wall coating paint, etc. will greatly increase the indoor humidity, so the solid wood floor, the level of the floor The old and new houses are essentially no different from the paving floor, and effective measures must be taken to prevent moisture. In particular, the floor and floor tiles, marble and other junctions. Must be cut off moisture, to prevent moisture from being rapidly absorbed by the floor to produce distortion!
Fifth, we must leave the gap between the expansion of the floor shrunk. In principle, there should be a certain gap around the contact with the floor (the south is usually 8~12mm). When the floor laying area is large (spanning ≥8m), the “bridge†should be adopted or the wood bulge should be fully taken into consideration during paving. Reducing factors, leaving the elastic gap between the floor.
Expert highlights:
â—† The expansion and contraction of solid wood flooring is an inherent characteristic, so the deformation is absolute, and no deformation is relative. Environmental conditions and paving techniques are the key; floor quality is the foundation.
â—† There must be a color difference in the selection of solid wood flooring. Consumers should fully understand the natural defects of solid wood flooring and fully consider the defects caused by irresistible factors such as small, slight, inconspicuous color differences, cracked ends, and walking. Generated noise and so on.
Third, the maintenance of wooden floors 1, keep the floor dry, clean, not allowed to mop the floor with dripping water, or use alkaline water, soap and water to wipe the floor, so as not to damage the gloss of the paint surface.
2, keep room ventilation, closed doors and windows closed for a long time, so as to avoid the floor from the drum deformation.
3, try to avoid sun exposure, so as not to surface paint long-term exposure to ultraviolet light under the aging, cracking.
4. Inadvertent contamination of parts of the board should be promptly removed. If oil stains are found, use a cloth dampened with warm water and a small amount of detergent to scrub. If it is a drug or pigment, it must be removed before the stain has penetrated the wooden surface.
5, it is best to play wax every three months (except laminate flooring), to clean the surface of the stain before waxing. Regular waxing keeps the floor clean and extends the life of the floor.
6, to avoid sharp objects scratch the ground, try to avoid dragging heavy furniture.
7. It is recommended to place a mattress at the entrance to prevent dust from entering the floor and damage the floor.
First, the market is generally sold solid wood paint-free floor.
According to the paint:
The swatches: The floor blanks themselves are flawed. By covering with a layer of opaque putty, the floor looks very uniform. The disadvantage is that after installation, under the irradiation of sunlight, it will fade, forming a significant color difference with places that cannot be seen. ! This is the practice of low-cost floors on the general market.
Varnish board: The flooring of this practice is very demanding on the billet, so the price is much higher. Ordinary consumers will mistakenly think that swatches look better than lacquer boards, so they will be deceived and spend more! The difference between the swatches, as long as the comparison of the front and back, the general front will be darker than the back.
In addition, the paint is divided into light, semi-matte and matt.
By width and narrowness:
Wide board: Generally refers to a board with a width of 115 mm or more and a length of 900-910 mm, commonly known as a board, and the price is about 10% more expensive than a narrow board. The width is not as wide as possible, the size is large, the floor seam is less, so the floor is easy to arch!
Narrow plate: refers to a plate with a width of 95mm or less and a length of 610-910mm, commonly known as a small plate. Especially high-end flooring, sometimes the price of small plates is much lower than the big plate! Some may be about 30% lower.
Second, the purchase and installation of wood flooring need to consider the factors
1. When purchasing solid wood flooring online, the buyer should contact the seller directly to ask the color of the floor; specifications; level. price and freight. Ask the seller if there is a model, there is a model, it is best to ask the seller to send the first model, confirmed after the purchase.
2 It is best to use Want Want to contact and pay via Alipay. Be sure to confirm the receipt of the goods. Check whether the quantity, quality, specification, design, material, etc. of the floor are consistent with the requirements of the purchase (or model) before confirming Alipay payment to avoid being deceived.
3. The paving of solid wood floors is a very important part. "Three-point quality seven-pavement" has been recognized and cautioned by experts. There are many ways to install solid wood flooring, but it has significant professional characteristics. Therefore, the paving of solid wood floors must emphasize professionalism. Only by understanding and understanding the basic properties of wood and the moisture content of wood floors and the environmental conditions for paving can be scientifically paved. Here, we can only introduce the basic requirements for paving:
First of all, before the solid wood floor pavement requires confirmation of environmental conditions. Cross construction is generally prohibited; the ground floor should be flat and dry (dryness should be based on the local equilibrium humidity as a consideration).
Second, we must choose the appropriate auxiliary material. Such as keel wooden file, auxiliary floor and moisture-proof products (moisture-proof layer, moisture-proof agent), keel must be dried or treated by anti-corrosion and anti-mite! It is not recommended to use undried wood as the keel directly to avoid affecting the floor.
Thirdly, the moisture content of the pre-installation floor should be tested to confirm whether its indicators meet or meet the national standards. Moisture content is the most important quality index of solid wood flooring. Confirmation before installation is conducive to proper understanding of installation clearance or tightness.
Fourth, we must pay enough attention to the treatment of the moisture barrier. As we all know, the floor paving environment is often the decoration of construction conditions, the humidity is much higher than normal conditions, mix cement paste, brush the wall coating paint, etc. will greatly increase the indoor humidity, so the solid wood floor, the level of the floor The old and new houses are essentially no different from the paving floor, and effective measures must be taken to prevent moisture. In particular, the floor and floor tiles, marble and other junctions. Must be cut off moisture, to prevent moisture from being rapidly absorbed by the floor to produce distortion!
Fifth, we must leave the gap between the expansion of the floor shrunk. In principle, there should be a certain gap around the contact with the floor (the south is usually 8~12mm). When the floor laying area is large (spanning ≥8m), the “bridge†should be adopted or the wood bulge should be fully taken into consideration during paving. Reducing factors, leaving the elastic gap between the floor.
Expert highlights:
â—† The expansion and contraction of solid wood flooring is an inherent characteristic, so the deformation is absolute, and no deformation is relative. Environmental conditions and paving techniques are the key; floor quality is the foundation.
â—† There must be a color difference in the selection of solid wood flooring. Consumers should fully understand the natural defects of solid wood flooring and fully consider the defects caused by irresistible factors such as small, slight, inconspicuous color differences, cracked ends, and walking. Generated noise and so on.
Third, the maintenance of wooden floors 1, keep the floor dry, clean, not allowed to mop the floor with dripping water, or use alkaline water, soap and water to wipe the floor, so as not to damage the gloss of the paint surface.
2, keep room ventilation, closed doors and windows closed for a long time, so as to avoid the floor from the drum deformation.
3, try to avoid sun exposure, so as not to surface paint long-term exposure to ultraviolet light under the aging, cracking.
4. Inadvertent contamination of parts of the board should be promptly removed. If oil stains are found, use a cloth dampened with warm water and a small amount of detergent to scrub. If it is a drug or pigment, it must be removed before the stain has penetrated the wooden surface.
5, it is best to play wax every three months (except laminate flooring), to clean the surface of the stain before waxing. Regular waxing keeps the floor clean and extends the life of the floor.
6, to avoid sharp objects scratch the ground, try to avoid dragging heavy furniture.
7. It is recommended to place a mattress at the entrance to prevent dust from entering the floor and damage the floor.
Experience on the floor to buy paint prices marble room interior decoration partition decoration style floor tile partition door
Monocrystalline Silicon,Monocrystalline Silicon Solar,Polycrystalline Cells,Monocrystalline Solar
ZHONGWEI CITY YINYANG NEW ENERGY , http://www.yinyangnewenergy.com