When we buy a wall paint, we should not be too persistent, such as scrub resistance, and it is not necessary to pursue it excessively, because it does not have much practical significance. Instead, it should pay attention to the actual basic performance of the paint.
Now people's requirements for latex paint are no longer limited to decorative, but also emphasis on functionality, so when purchasing, the function of latex paint is very important, according to different parts of the brush to choose latex paint. For example, latex paints used on the walls of bedrooms and living rooms require strong adhesion, delicate texture, good resistance to differentiation and air permeability, and latex paints for kitchens and bathrooms should be waterproof, mold-proof and easy to wash.
Inferior emulsion paint not only affects the construction quality, but also contains unqualified chemical raw materials that can harm human health. They should try to purchase them from specialty stores or special dealer stores. When purchasing, check the product's packaging, appearance and intrinsic quality.
After the lid is opened, the truly environmentally-friendly emulsion paint should be water-based, non-toxic and odorless, so if the latex paint has a pungent odor or industrial flavor during the smell, it is not ideal.
After a period of time, the surface of genuine latex paint will form a very thick and elastic oxide film, which will not be easily cracked, while inferior products will only form a very thin film that is fragile and has a spicy smell.
Mix the latex paint with a wooden stick and pick it up with a wooden stick. The high-quality latex paint will become fan-shaped when it goes down.
Touch with your finger, genuine latex paint should feel smooth and delicate.
The latex paint is applied to the wall and wiped with a damp cloth. The genuine color is bright as new, and the defective product will fade due to poor coagulation and water resistance.
When looking at the ingredients when purchasing, the composition of the high-quality coating should be a copolymer resin or a pure acrylic resin.
Don't forget to look at the product's shelf life.
Although latex paint has many advantages such as convenient construction, strong hiding power, rich colors, scrub resistance, and strong environmental protection, it also has some common problems of quality, and poor handling will affect the quality of decoration.
Wall flowers, uneven color
Mainly because the grassroots are of different colors and they are not processed. This situation must be re-brushed again to cover it. In addition, when selecting the materials, it is necessary to pay attention to selecting the same manufacturer, the same variety, and the same lot number, otherwise there will be a color difference.
rough surface
The main reason is that the primary treatment is not clean, the brush has sand, debris or the operating environment is not clean. First, clean the base layer, thoroughly clean the brush, and clean the environment. The main reason for peeling is that the grass is too smooth or oily. The base layer can be brushed and cleaned with a steel brush to clean the base layer, and the oil can be decontaminated with a solvent.
Wall cracking
This phenomenon is most common and the specific reasons depend on the circumstances. If it is a GRC lightweight partition, joints must be carefully treated for crack prevention. Generally, glass fiber or kraft paper is used. The characteristics of the partition wall are prone to small cracks. Therefore, it is best to minimize cracking in home decoration. Once covered with glass fiber cloth or bean bag cloth, if the sand wall putty needs to be removed, it is best to put plasterboard after eradication of putty or eradicate the sand to the grassroots; if it is a load-bearing wall or solid wall, the cracking may be due to putty too thick or spaced Short time, putty is not dry, this situation in the old house when the top of the wall leveling the emergence of more situations, construction should pay attention.
Flooring selection Three trees Paint porch Decoration Paint Lacquer glass Home Furnishing Bathroom Living room wall Color decoration Living room Kitchen Glass Sliding door Small bedroom
Auxiliary Agent For Alloying /Calcium Carbide
This is used for making Calcium Carbide and smelting as an agent. It is not the raw material, but it is an important agent during production.
Auxiliary Agent For Alloying /Calcium Carbide
Auxiliary Agent,Auxiliary Agent For Alloying,Auxiliary Agent For Calcium Carbide
NINGXIA PURU CHEMICAL CO., LTD , http://www.nxpuruchem.com