Self-renovation after renovation

After the renovation was finished, and also lived for a while, the inconvenience in life was gradually revealed. What to do, find a way to solve it.

1. The problem of the shower curtain is that the bathroom is not large, and the silver is insufficient. We must also separate wet and dry. We use a water-blocking stone + shower curtain to separate the shower area. That is to say, saving the money, the effect is very significant, but there is a problem. I was puzzled for some time. When I took a shower, the shower curtain was affixed to the body and I felt cold and irritable. It was uncomfortable. The hotter the water, the more severe it was. In order to reduce the moisture, I sometimes had to open the exhaust fan and the shower curtain was also at the bottom. Involuntarily sticking to the leg; it is estimated that many people have had the same experience with me and may still be plagued by this cold shower curtain.
After thinking about it for a period of time, it is not necessary to increase the shower curtain and increase the amount of sloping. Suddenly, I think of the curtains. Didn't we add a plumb bob below the curtain? Adding the lead sinker under the shower curtain will not change the status quo. After trials, huh, huh, success, if you have the same confusion, try it out.
Curtains use lead sinkers, 100g, when you buy it is the heaviest and thickest kind. I bought 2 yuan/meter.

Put the plumb bob in the folds under the shower curtain. How wide the shower curtain is, and how long will it take to buy the plumb.

2. The turnable TV looks at this picture first. If you sit at the table and eat and you want to watch TV, then you have to turn the TV in the living room TV cabinet to an angle.

It seems that it is necessary to get the TV moving. If there is a turntable, you can turn it 90 degrees. It's ok to look for it on the market for a while.
Then we called the crowd to search for it, and when we look back, it was in the dim light; a TV tray that a friend intended to abandon was moved back to my home and placed on the TV cabinet. It was too big and it couldn't reach much angle. The wall seems to have to be remodeled.

It still seems to need to be remodeled. The bottom turntable is reserved, and replacing a pallet is what it is.

The center of the pallet is aligned with the center of the turntable and the screw is fixed.

After the transformation was successful, he praised himself and just took the opportunity to thank him for rejuvenating Lao Song. It is said that this circular plate can only be manually sealed. The machine can't do it. It really requires technology. I looked at it. Yes, impeccable.

3. The washing machine drain outlet reserved for washing machine manufacturers is in the north closed balcony, but I destroyed the balcony wall, and meals together as a whole, the washing machine can only be moved to the bathroom, but still a floor drain, Then lead it from the basin into the water, not far from the distance.

However, even if it is tiled, there is no height of the floor drain. Only a pipe is led upwards.
A question arises. How to do it in the Backwater Bay? Nothing. If the anti-taste is troublesome, Oh, I can't live without myself. Use the water pipe that comes with the washing machine, cut off the excess part and put the pipe in the washing machine. A bend was created between the outlet and the outlet, using the height difference to store water in the pipe to block the odor of the sewer.

Between the water outlet and the plastic pipe can be sealed with glass glue, how about, this idea is good, but also save the money.

4. The mobile computer desk is really not a place for laptops, and holding notebooks everywhere. Once I strolled around IKEA, suddenly a bright spot and found a portable laptop table.

After assembly, the height is free to go up and down.

The weight is very light, there is a handle on the top, the movement is very convenient, small size does not occupy, recommend to everyone Kazakhstan.

TV balcony window TV decoration glass living room renderings living room TV living room TV cabinet TV cabinet decoration renderings decoration living room glass table glass dining table glass bricks turntable bathroom tiles ceramic tile adhesive balcony tiles

Angular Contact Ball Bearing

Angular contact ball bearings mainly bear large unidirectional axial load. The greater the contact angle, the greater the load bearing capacity. The material of cage is steel plate, brass or engineering plastics. The forming method is stamping or turning. It is selected according to the bearing form or using condition. Others include combined angular contact ball bearings, double row angular contact ball bearings and four-point contact ball bearings.

Angular Contact Ball Bearing
Bearing Brand
LS
Bearing Types
Angular Contact Ball Bearing
Bearing Material
Chrome steel Gcr15/Stainless steel
Bearing Precision
P0,P6,P5,P4,P2
Bearing Package
Plastic bag+carton box
Bearing Shipping
1-3 work days

Angular contact bearings are able to support radial load and axial load. As single row angular contact ball bearings can only support axial load in single direction, matched bearing mounting is often adopted to them as matched parts of bearings, preload for them is more convenient. Retainers are made of brass, synthetic resins or others subject according to individual bearing features and application conditions.

a=15 °7000C

a=25 °7000AC

a=40 °7000B


Angular contact ball bearing include:


1) Single row angular contact ball bearing


2) Matched angular contact ball bearing


3) Double row angular contact ball bearing


4) Four-point contact ball bearing


Angular Contact Ball Bearing,P4 Angular Contact Ball Bearing,High Speed Angular Contact Ball Bearing,Double Row Angular Contact Ball Bearing

Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearings.com