RTV silicon rubber General Use for Plaster, resin, cements mold is good for casting Plasters, Cements and resin, which is air drying.
Makes very economical strong and durable moulds for the casting of Plasters, cements and resin. Can also be used to cast polyurethane as well.
(2) Operating steps of RTV silicon rubber for Plaster, resin, cements mold
1. Deal with the original mould.
2. Spray release agent evenly on the original mould
3. Weigh the silicone rubber and curing agent correctly and mix them evenly
4. Deairring and air bubble eliminating handling
5. Perfusion or brushing process
(3) Features of RTV silicon rubber for Plaster, resin, cements mold:
(1) Free customer service to solve technical issues in earliest time.
(2) Curing agent arrange together as free charged
(3) Very low shrinkage and good dimensional stability
(4) High elasticity, for easy removal fo complex replica parts
(5) Sample orders are available.
(6) Special produce accordingly to your request
(4) Storage and Precautions of RTV silicon rubber for Plaster, resin, cements mold RTV silicone rubber for Plaster, resin, cements mold, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported As non-hazardous goods. The shelf life of the product is about one year from The date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Any more information of RTV silicon rubber for Plaster, resin, cements mold, please contact us.
| Item | viscosity(CS) | Hardness shore A | Tensile-tstrength (kgf/cm2) | Tear-strength(kgf/cm) | elongation: (%) | shrinkage: (% | Curing agent ratio (%) | Pot time (min ) |
| 635 | 13000-15000 | 35±2 | 43-46 | 33-36 | 380-400% | ≤0.3% | according to customers requirements | |
| 625 | 16000-18000 | 25±2 | 35-38 | 21-25 | 450-500% | ≤0.3% | according to customers requirements | |
| 630 | 28000-30000 | 30±2 | 42-45 | 28-35 | 400-440% | ≤0.3% | according to customers requirements | |
For more information, pls contact with Ivy at any time!
Tel:Â +86-755 8994 8019
 Mobile: +86-18938867558
 (1) RTV silicon rubber application:
RTV silicon rubber General Use for Plaster, resin, cements mold is good for casting Plasters, Cements and resin, which is air drying.
Makes very economical strong and durable moulds for the casting of Plasters, cements and resin. Can also be used to cast polyurethane as well.
(2) Operating steps of RTV silicon rubber for Plaster, resin, cements mold
1. Deal with the original mould.
2. Spray release agent evenly on the original mould
3. Weigh the silicone rubber and curing agent correctly and mix them evenly
4. Deairring and air bubble eliminating handling
5. Perfusion or brushing process
(3) Features of RTV silicon rubber for Plaster, resin, cements mold:
(1) Free customer service to solve technical issues in earliest time.
(2) Curing agent arrange together as free charged
(3) Very low shrinkage and good dimensional stability
(4) High elasticity, for easy removal fo complex replica parts
(5) Sample orders are available.
(6) Special produce accordingly to your request
(4) Storage and Precautions of RTV silicon rubber for Plaster, resin, cements mold RTV silicone rubber for Plaster, resin, cements mold, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported As non-hazardous goods. The shelf life of the product is about one year from The date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Any more information of RTV silicon rubber for Plaster, resin, cements mold, please contact us.
| Item | viscosity(CS) | Hardness shore A | Tensile-tstrength (kgf/cm2) | Tear-strength(kgf/cm) | elongation: (%) | shrinkage: (% | Curing agent ratio (%) | Pot time (min ) |
| 635 | 13000-15000 | 35±2 | 43-46 | 33-36 | 380-400% | ≤0.3% | according to customers requirements | |
| 625 | 16000-18000 | 25±2 | 35-38 | 21-25 | 450-500% | ≤0.3% | according to customers requirements | |
| 630 | 28000-30000 | 30±2 | 42-45 | 28-35 | 400-440% | ≤0.3% | according to customers requirements | |
For more information, pls contact with Ivy at any time!
Tel:Â +86-755 8994 8019
 Mobile: +86-18938867558
Â
Zhejaing Sealand Technology Co., Ltd. is a trustworthy manufacturer of Mass Flow Meter, Mass Flowmeter, Mass Meter, Flow Meter, Flowmeter, ATEX, IECEx & CE approved. The product range covers different size from DN03 to DN150, and bigger sizes are being developed.
Sealand mass flow meter is designed and produced according to world`s latest Coriolis technology with exelent appearance, stability and accuracy to measure mass flow rate of a fluid traveling through a tube, widely applied to alternative energy, oil & gas, chemical, food & beverage, industrial energy, marine, power, pulp & paper, water & wastewater industries, etc.
Mass flow meter measures the mass based on Coriolis effort. The operating principle involves inducing a vibration of the tube through which the fluid passes. The vibration, though not completely circular, provides the rotating reference frame that gives rise to the Coriolis effect. While specific methods vary according to the design of the flow meter, sensors monitor and analyze changes in frequency, phase shift & amplitude of the vibrating flow tubes. The changes observed represent the mass flow rate and density of the fluid.
Mass Flow Meter, Mass Flowmeter, Mass Meter, Flow Meter, Flowmeter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com