How to automatically restart the computer server

In many cases, we need to automatically restart the computer or server. How do we configure it?

First enter the BIOS settings main interface, select [POWER MANAGEMENT SETUP], and then select [PWR Lost Resume State]. This item has three options.

Select [Keep OFF] to indicate that the computer will not start automatically when the call is received after a power failure.

Select [Turn On] item, the computer will start automatically when the call is called after power failure.

If [Last State] is selected, the computer will return to the state of the computer before the power failure when the call is called after the power failure. If the computer is turned on before power off, it will automatically start up after the call. Before the power off is in the off state, then the computer will not automatically boot after the call

External Wall Tile is available in 25x25mm, 45x45mm, 45x195mm, 100x200mm, 50x200mm, 60x240mm, 100x297mm, 200x400mm, 300x600mm, 400x800mm...

There are many types of Outer Wall Tiles , including Faux Granite Tiles, faux marble tiles, mosaic tiles, etc. suitable for different places.

Advantage of External Wall Panel

1. The surface of the external wall tile has a luster, flat or rough surface, and can present a variety of textures. The design is rich and varied, and has a strong decorative effect.

2, The Outside Wall Tile has superior physical properties, sturdy and durable, good weather resistance, scrub resistance, etc., and has a long service life.

3, Easy to clean, fire, water, wear, corrosion and low maintenance costs.

4. Thin Porcelain Tiles on the outer wall, [light, large and thin", which greatly reduced the building load.

external-wall-tile

Construction Notes

1. When the structure is constructed, the verticality and flatness of the outer wall should meet the standard requirements. The dust, dirt and grease on the surface of the base are removed.

2. On the base plastering surface, first hang the vertical and horizontal control lines, and then hang out the tile control line according to the size and arrangement of the tiles.

3. When the tile is pasted, the mortar should be full. It is not advisable to knock and move more. Especially after the mortar is collected, it cannot be corrected.

4. After the caulking is completed according to the design requirements, clean the surface with a clean cloth.

5. About 30 hours after the completion of the caulking (depending on the weather at the time), and after the brick joint has solidified to a certain strength, rinse the brick surface thoroughly from top to bottom with clean water.

outside-wall-tile

External Wall Tile

Outer Wall Tiles,Outside Wall Tile,External Wall Panel,External Wall Tile

UMS New Materials Industry Co.,LTD , https://www.ums-factory.com