From 6 mm to 8 mm, to 12 mm, 15 mm... In recent years, the thickness of the floor has increased and the floor has entered the "thick" modernist era. Most consumers naturally think that the thicker the floor, the more durable the floor, the better the quality of the floor. So what is the truth? The Chinese wooden floor net Xiaobian takes you a glimpse.
According to Xiaobian, in fact, the floor thickness of 8 mm has reached the international standard thickness. For wood flooring, thickness is not the standard that determines the quality of the floor. Thick plates, like thin plates, cannot be used once the surface is worn out. Therefore, the quality of the floor surface layer is largely related to the service life of the wood floor, not the thickness of the board.
Taking laminate flooring as an example, laminate flooring is generally composed of four layers of materials, which are wear-resistant layer, decorative layer, substrate layer and moisture-proof layer. The wear-resistant layer is made by impregnating melamine resin with a surface paper with a wear-resistant material of aluminum oxide, which is a key part of determining the life of the laminate flooring.
The wear-resistant layer imparts important physical and chemical properties such as abrasion resistance, scratch resistance, cigarette burning resistance, pollution resistance, corrosion resistance and moisture resistance of the laminate flooring. The wear resistance of household laminate flooring should be greater than or equal to 6000 rpm, and the wear resistance of laminate flooring in public places should be greater than or equal to 9000 rpm.
So how to distinguish the quality of wear resistance, Xiaobian for your three tricks:
1. First of all, it is necessary to look at the test report. There is a clear description of the formaldehyde and wear resistance of the floor.
2. If the floor is strengthened, a small piece of product can be taken. If the surface of the product is directly polished with 20 mesh sandpaper for 20-30 times, if the decorative paper is found to be worn, the wear layer is easily damaged and not wearable. Usually the qualified wear layer is polished after 50 times, the surface layer will not be damaged, and the decorative paper will not be damaged.
3. Observe that the surface layer should be clear and free of white spots.
Concerned about surprises
Label: Flooring products: the thicker, the better the quality
Previous: Make good use of big data analysis to create a "screaming" dress Next: How can kitchen fumes be wiped out?
Rp 300 Graphite Electrode,300Mm Diameter Graphite Electrode,Eaf Lf Graphite Electrode,Low Price Graphite Electrodes
Carbographite Industrial PTE.LTD , https://www.graphites.pl