There may be leaks in the ceiling of the living room, especially in the ceiling of the bathroom. This problem is mostly caused by the lack of waterproofing in the upper floors. Therefore, we have better waterproof the ceiling to avoid water leakage. What does the ceiling waterproof do? How to prevent the ceiling from leaking water? Let's learn about it with Xiaobian.
First, the ceiling waterproof security practices
Ceiling waterproofing safety practice 1, smallpox treatment
Before the ceiling is waterproof, it is necessary to first treat the ceiling, that is, the basic layer of the construction area. Before the base layer can reach the construction requirements to start waterproofing, it is necessary to first clean the floating dust and loose concrete on the surface. It is better to use manual The polishing machine polishes the surface, and if the surface has water or oil marks, it must be cleaned and removed.
Ceiling waterproof safety practice 2, deployment of waterproof material
After the surface treatment is completed, the waterproof material can be prepared and prepared in a ratio of 1:4. No other solvent is needed. The two components in the product are continuously stirred until the paste is obtained.
Ceiling waterproof safety practices 3, brushing waterproof material
After the waterproof coating has been prepared, spread it evenly on the ceiling. It is best to use a cross-brush method to avoid some missing places. Although it does not require any technique, it should be taken seriously.
Ceiling waterproof safety practices 4, key brushing joints
For the joints between the two walls, there are also connections between the water pipe and the wall. These areas must be heavily brushed, because the connections themselves are relatively fragile and are the most vulnerable to water leakage.
Ceiling waterproofing safety practice 5, surface layer brush protection
After the ceiling is evenly painted and waterproof paint is applied, it needs to be protected and air-dried for 24 hours before it can be used for other decorative protection on the surface, such as approved putty, brush coating, etc., which can increase the service life.
Second, how to avoid leakage of the ceiling
1. It is forbidden to bury the pipe on the floor
If the bathroom is not renovated, it is prone to leaks and other problems, so it is a problem that almost everyone cares about. If you want to avoid problems such as water seepage and water leakage in the bathroom, you may not be able to nick or make holes on the floor during the renovation. , also can not change the floor drain and the location of the upper and lower water pipes. The bathroom is best not to do too much modification, otherwise it will increase the building surface load, resulting in floor damage, such as ceiling leaks.
2, choose to use lightweight materials
To avoid water leakage from the ceiling, it is best not to blindly pursue the aesthetics to choose the ceiling. The material of the ceiling should be lighter and lighter, like light steel keels, gypsum board, etc., and their fire rating is also high. Drill holes in the floor of the floor to place the ribs, and the keel can be directly fixed on the surrounding wall.
Editor's Note: The above is about the ceiling waterproofing safety practices and how the ceiling avoids leaks. I hope that the contents of Xiaobian can let you solve the problem. If you want to know other relevant knowledge, you can pay attention to our website and more information on renovation.
Ceiling waterproofing
Qingdao Bosheng building materials Co., Ltd , https://www.worldcrestbm.com