The floor was stepped on, "creaking" and "squeaking". Many newly-renovated users encountered this depressing problem after installing the floor. To find out what caused the problem, it depends on how the sound is made. If you click on a foot in a place, and you step on it again and continue to do so, it is definitely not fixed between the wood dragon and the ground hibiscus, or the hibiscus material is too soft and hard to pull. Get up to it.
If there is a sound in some places, sometimes it is not. This situation is mostly caused by the floor holes being smaller than the drill holes in the solid wood floor, and there are loose gaps between the floors. (It is also related to the quality of the floor itself) After half of the homes have been renovated, the floor will sound more or less as it walks, but the location is different.
There are few ways to deal with floor noise. Even if the problem is alleviated after treatment, it cannot be completely cured.
There is a way to completely eradicate the ground, re-tighten the dragons, and re-install the floor. It is really a waste of time and effort. No one wants to counterattack and reload. The floor will not sound until you focus on the following processes and methods before installing the ground dragon and the floor:
1, before the installation of earthworms are generally used 12mm drill hammer drill hole, then wooden box at least 18-20mm above the square wood Morinda is only useful, can not easily hit the hole to go, a few days a wooden shit a dry shrinkage Just
2. The material of the rammedger is harder than that of the earthworm and the hard shrinkage of the wood is small. The worm does not easily pull up the rammer and maintain its stability;
3. Some rooms have a floor level difference of several centimeters. At this time, the master carpenter will put some knife-shaped corks or plywoods under the ground dragon to ensure the level of the ground dragon. Don't forget to raise the floor height by 2.5. Above the centimeter between the earth dragons, short dragons must be fixed with each other to prevent the earth dragons from swinging around to ensure that the earth dragons are firm and firm;
4, when installing solid wood floor drilling, the aperture must be smaller than the floor nails, so that the floor before eating nails;
5, the wall is set aside more than 1 cm above the floor contraction joints, in order to avoid climate change or floor moisture content does not match the expansion of the arch, which most people know.
The above techniques seem to be small in detail, and the problem is often in small details that people do not pay attention to. In fact, these nodal skills are an important factor in ensuring the quality of the flooring, and they are also an experience point of reference for the relevant personnel and the users to be installed.
Matters needing attention floor installation nature floor room home improvement
Wire Drawing Wheels,Buffing Disc For Grinder,Nylon Abrasive Wheel For Drill,Metal Polishing Wheel For Angle Grinder
Jiangmen Gude Polishing Equipment Co., Ltd , https://www.kokipolishing.com