KCB633 stainless steel gear pump structural features: KCB633 stainless steel gear pump stainless steel gear, shaft, stainless steel pump body, safety valve, shaft seal composed of the end. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation. KCB633 stainless steel gear pump has a well-designed drain and return tank, stainless steel gear pump in the work to withstand the torque of the smallest, so the bearing load, wear a small, high pump efficiency. KCB633 stainless steel gear pump with safety valve as overload protection, safety valve full reflux pressure of 1.5 times the pump rated exclusion pressure, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline.
Pre-Treatment Auxiliary Series
Reactive Dye Printing Thickener Co., Ltd. , http://www.nsdispersant.com