Sintered NdFeB Magnet

  • Model NO.: HL-18
  • Shape: Round
  • Max Operation Temp: 220 Degree Centigrade
  • Company Certificae: ISO Ts16949:2009
  • Applicated: Linear Moto
  • Size: According to Your Design
  • Composition: NdFeB Magnet
  • Specification: ROHS
  • HS Code: 85051110
  • Application: Speaker Magnet, Industrial Magnet, Jewelry Magnet, Solenoid, Motor Magnet
  • Coating: Zinc
  • Product Certificate: RoHS
  • Coatings: Ni, Zn, Gold, Copper, Epoxy, etc
  • Salt Spray Test: More Than 48hr
  • Type: Permanent
  • Trademark: COCO
  • Origin: China Mainland
Sintered NdFeB Magnet China Manufacturer

NdFeB Permanent Magnet Inquiry

To receive a quote for NdFeB Permanent Magnet, please provide the following details:

(01) Outer Diameter, Inner Diameter or, Degree of Angle;
(02) Thickness, Length;
(03) Grades;
(04) Coating;
(05) Tolerances and Magnetization Direction (North on the Outside Face / South on the Outside Face / Magnetized through Circumference / Magnetized through Thickness ).
(06) Testing Conditions

MARK:
(01) Samples and small quantity are available.
(02) All the inquiries, questions and emails will be replied within 1 hour.
(03) We have stock material for standard product.

In addition, if you customized NdFeB Permanent Magnet, please fax the specifications or your drawing to 0086-574-62947528.

Contact Person: Hola MB: 008615888186003

Highlight: Our Company Service

(01) My mobile phone: 008615888186003 is always ready 24hours whole day.
(02) All the inquiries will be proceed in 30 mins, pls.
(03) If your design is irregular shape, I will offer you in 3 hours.
(04) will follow you once inquires receipt, until finish your order successfully. Don't like some company, any orders are followed by pointed persons who is not a sales, so mistakes might be made.
(05) The important thing is that I will pay most attention to product inspection in the whole process.
(06) My philosophy: To give my customers best product with best service as possible as I can.

NdFeB Permanent Magnet Product Description:

1. Materials: Ne-Fe-B

2. Shape: Various as you wish

3. Certificate: ISO/TSI6949: 2009

4. Powerful: Neodymium magnets (sintered NdFeB magnets) are more powerful than any other permanent magnet material in the market today.

5. Wide product range: N35-N54, 35M-52M, 33H-50H, 33SH-45SH, 30UH-42UH, 30EH-38EH, and 28AH-33AHB.

6. High performance: High intrinsic coercive force (up to 35KOe) and energy product (up to 55MGOe), the maximum working temperature of 230 degrees Celsius.

7. Competitive price: Very competitive price (lower than market average) due to mass production.

8. Coating: All the neodymium magnets oxidize rapidly when exposed, so an anti-corrosive coating (usually electroplating) is used to extend their working life. Such as Ni, Zn, gold, copper, epoxy, chemical, parylene and so on;

9. Applications: Magnet Separators, Sensors, Motors, Rotors, Wind turbines, Wind generators, Loudspeakers, Magnetic hooks, Magnetic holder, Filters Automobiles Magnetic jewelries, toys, magnetic buttons, Magnetic therapy and so on;

10. Quality: As to give good service, quality of each piece is guaranteed. Every piece of magnets is tested by ISO/TS 16949: 2009.

11. Caution: You should be extremely careful when install neodymium magnet, as they can easily pinch fingers.

12. No for Kids: NdFeB magnets are not suitable for children.

NdFeB Permanent Magnet Production process:

Raw Materials-->Mixture--->Vacuum Melting--- > Powder Production--- >Molding ---> Vacuum Sintering--- > Testing--- >Mechanical Processing--- > Surface Coating--- >Magnetized--- > Inspecting--- > Packing and Shipping.

NdFeB Permanent Magnet Directions of Magnetization:

A. Thickness Magnetized
B. Axially Magnetized
C. Diametrally Magnetized
D. Multi-poles magnetized
E. Radial Magnetized
F. Customized specific requirements magnetized

1.Quality pass Germany TUV testing. Tuv testing is third safety certificate company,.more authoritative.

2. This system welding machine use Surface Mount System to install electron component and the main PCB board is single .So this system could make the machine`s quality is very stable. Rise the quality consistency.   

.

3.The power tube of the switch use germany infineon only.The PCB board thickness size is 2.7mm. 

4.The insert component use Taiwan KSS.

5.The aluminum web wing is more bigger and weighter than normal.

6.Passed EMC certificate and get the EMC certificate. According to IEC 60974-1 standard.

7. Our machine`s input voltage is auto change between 85V-240V.So could work under any voltage. Like japan 110V or America 110V AC. Like European 220V-240V AC. Like Brazilian 110V/220V together AC.

8.CEL. Could weld Cellulose electrode easy.

9. Welcome any customer to make your design. We have advanced exploit troop.

10.PFC (Power Factor Correction is more than 98%. So according to energy conversation ,environmental protection and low-carbon.

11. VRD make no-load output voltage under 24±2V, But when arc strike twinkling could rise working output voltage.So this technique could have more physical protection.


Welding Tools

industrial Welding Machine,Pigeon Welding Machine,Family Quality Welding Machine

YongKang WALMA Tools CO., LTD. , http://www.walmatools.com