Paper cutter safety screw is easy to break several reasons

Paper cutter safety screw is easy to break several reasons
1. The blade edge is not sharp enough;

2. The left and right sliders of the knife holder are worn out;

3. The safety screw is not tightened frequently; the safety screw is in the wrong direction when it is installed;

4. If the safety pin has not been withdrawn and the knife has fallen down and hit the safety plug;

5. The two end faces of the connecting safety screw are not flat enough due to deformation, etc.;

6. The blade is cut into the blade too deep or the blade is not straight enough to be cut, so that the knife is too deep to cut the paper;

There will also be malfunctions due to electrical reasons.

This information comes from: http://


Derrick Hyperpool Shaker Screen



Replacement PWP Screens for Derrick Hyperpool Shakers


SJ-PWP DH Shaker Screen is designed for the replacement screen of Derrick Hyperpool shale shakers. There is an operating handle on one side of the screen and a triangle breach in the center of the opposite side. Thanks to he machine assembled backside seal rubber, even the strip appears a small broken part, the other parts will be steady on back panel still. The most obvious advantage of Hyperpool PWP screen is better resistant to oil. And mesh sizes are commonly available from API 40 to API 270.

Technical Parameter

  • Material: stainless steel 304/316/316 L.
  • Construction Type: PWP (perforated wear plate).
  • Wear Mesh Shape: rectangle.
  • API RP 13 C Designation: API 20 – API 325.
  • Series: DX, DF, HP optional.
  • Color: green.
  • Package: 2 pcs per carton, 20 pcs/wooden case.

Adaptable Shale Shaker Model

SJ-Derrick Hyperpool Pwp Shaker Screen are used as the substitute screen for

  • Derrick Hyperpool 4-panel shaker.
  • Derrick Triple Hyperpool shaker.
  • Derrick Dual Hyperpool with mud cleaner.
  • Derrick Hyperpool VE (Vapor Extraction)

Competitive Advantage

  • Stainless steel 304/316 wire mesh for longevity.
  • Increase shaker capacity and reduce mud loss.
  • Scientific & reasonable cost control system for competitive price.
  • Higher flow rates without sacrificing cut point integrity.
  • API RP 13C (ISO 13501) compliant.
  • Adequate inventory in the shortest time to meet customers' demand.
Derrick Hyperpool PWP Shaker Screen



Remarks:

Derrick, Hyperpool, PWP, DX, DF, HP are marks of Derrick Corporation.

ShengJia only produces the replacement screens but not original from Derrick

Derrick Hyperpool PWP Shaker Screen


Derrick Hyperpool PWP Shaker ScreenDerrick Hyperpool PWP Shaker Screen

Derrick Hyperpool PWP Shaker Screen

Derrick Hyperpool Pwp Shaker Screen ,Derrick Hyperpool Shaker Screen,Derrick Hyperpool Shale Shaker Screen ,Derrick Hyperpool Pyramid Shaker Screen

Anping Shengjia Hardware Mesh Co.,ltd , http://www.oilshakerscreen.com